Initialize The Cf Card - Hammond XK-3 Owner's Manual

The CF CARD must be "INITIALIZED" first (= before you use it). Perform the
following, step by step, to do the initializing operation.
This operation losts the all data in the CF card.
1
Insert the CF card into the slot.
2
Touch the [MENU/EXIT] button.
3
Select PAGE D by the [PAGE] button.

INITIALIZE THE CF CARD

4
5
6
7
Touch [4] CF FORM.
The FORMAT mode is displayed.
Touch the [4] OK button.
The Confirmation message is displayed.
Touch the [4] YES button.
The initialization starts. It takes only a few seconds.
NOTE: If you do not want to initialize, just touch the [3]
NO button.
To return to the PLAY mode, touch [PLAY].
91
Save the Set Up