Rear Panel - Hammond XK-3 Owner's Manual

Rear Panel

41 42
LEFT SIDE OF REAR
39. AC Inlet
Connects the A.C. Power Cable.
40. POWER Switch
This switches on and off the keyboard.
MIDI TERMINAL
41. MIDI OUT
Sends out the performance information of this keyboard.
42. MIDI IN 1(PEDAL)
This is the MIDI IN Terminal used mainly for the Pedal
Keyboard.
[The factory setting] The MIDI information received by
channel. You can set that through this terminal functions
as PEDAL, regardless of the channel.
43. MIDI IN 2(LOWER)
This is the MIDI IN Terminal used mainly for the Lower
Keyboard.
[The factory setting] The MIDI information received by
channel. You can set that through this terminal functions
as LOWER, regardless of the channel.
39 40
43 44 45 46
STORAGE
44. CF CARD SLOT
Insert the CompactFlash™ Card here.
This is used to store the setting of this keyboard.
Use required CompactFlash™ Card.
CONTROLLER TERMINAL
45. FOOT SWITCH1
This terminal is for the Foot Switch (= FS-9H - optional)
and the Leslie Switch (= CU-1 - optional).
You can switch the speed of the Leslie effect and the
Combination Preset, etc. while playing.
46. EXP. PEDAL1
This terminal is for the Expression Pedal (= V-20R etc. -
optional.)
You can control the volume while you play.
47. EXP. PEDAL2
This terminal is for the exclusive Expression Pedal (=
EXP-100F or EXP-100AN - optional).
13
47
Introduction