Effective Use Of Link-Lower/Pedal; When Link Lower/Pedal Is On; When Link Lower/Pedal Is Off - Hammond XK-3 Owner's Manual

EFFECTIVE USE OF LINK-LOWER/PEDAL

This is the function to switch/record only from the connected MIDI equipment, and not to
operate the Preset for LOWER and PEDAL Part on this keyboard.
The Preset Keys on B-3/C-3 are independent, key by key, and so they were operated
independently. This function simulates that.

WHEN LINK LOWER/PEDAL IS ON:

When you recall the Combination Preset by the Preset Key, the
content of all UPPER/LOWER and PEDAL Parts will change.
If you want to change the Lower Part to another Preset Key,
send the Program Change corresponding with the key by the
MIDI keyboard connected to MIDI IN (LOWER) (hereinafter
"Lower Keyboard").
NOTE: Refer to the Appendix for the details on Program Change
and Keys.
The recording to the Combination Preset is made to all the
UPPER/ LOWER and PEDAL Parts on this keyboard. It is
made only to the LOWER Part on the Lower Keyboard.
To record to the LOWER Part Preset, send the Program Change
from the Lower Keyboard, depressing the [REC/JUMP] button
of this keyboard.
If different Preset Keys are selected between the UPPER and the LOWER/PEDAL Part,
the display will be like this.
LOWER&PEDAL
Blink
UPPER
Light

WHEN LINK LOWER/PEDAL IS OFF:

If you recall the Combination Preset by the Preset Key of this
keyboard, the content of only the UPPER Parts will be
switched.
To recall LOWER Part Preset, send the Program Change
corresponding to the key by the Lower Keyboard.
To the Combination Presets, on this keyboard, only the UPPER
Part is recorded by the Preset Keys, and only the LOWER Part
is recorded by the Lower Keyboard.
57
Setting the Parameters