Combination Presets; Bank And Key - Hammond XK-3 Owner's Manual

42
The settings you have made can be recorded into the Combination Presets.

BANK AND KEY

Combination Presets

C C# D D# E
C
C#
D
D#
E
F
F#
G
G#
A
A#
B
COMBINATION PRESETS
Key
F F# G G# A A# B
Owner's Manual
The combination preset chart to the left, shows the [BANK]
and the [KEY], information.
Access is made by the Preset Keys. To select the [BANK],
press the key, holding down the [BANK] button. To select the
[KEY], just press the Preset Key.
Recording and recall is determined when the Key is designated.
Only designating the Bank does not switch the recording or
recall.
Refer to the illustration on the left bottom for each Key and
Name.
The [B] key on the right end is a special Preset, called "Adjust
Preset". Here the Drawbar Registration on the panel always
matches the internal registration.
NOTE: The setting of the Preset Keys [C] to [A] on the B-3/C-3 is
fixed, and the [A#] and [B] are used to switch the
Drawbar Registration on the panel. However, on this
model, you can change the setting by moving the
Drawbars, even while using the keys [C] to [A].
COMBINATION PRESETS
On the original B-3 organ the preset keys only stored drawbar
registration information. On the XK-3 however in addition to
drawbar registration you can store many various parameters to a
preset. Thus the name "Combination Preset".
NOTE: The parameters to be recalled by the Preset Keys can be
limited Bank by Bank. (P. 56)