Basic Hook-Up; Using Effect Loop - Hammond XK-3 Owner's Manual

16
See the figure below for connection.
Amplifiers or speakers are not mounted in this keyboard.
You must connect an external amplifiers and speakers (or Powerd Speaker) in order
to hear the keyboard sounds.
You can also enjoy playing this keyboard by connecting Stereo Headphones to the
Headphone Terminal.
Be sure to do the connection after you switch the Power OFF on this keyboard and
all connected equipment.
AC Power Cable
(provided)
The Effect Loop is used when you want to connect the Leslie Speaker and the
external Effects module which provides audio prior to the built-in Leslie Effect.

BASIC HOOK-UP

Foot Switch FS-9H
(optional)

USING EFFECT LOOP

Owner's Manual
Amplifier, Speakers etc.
Use effects modules which have a output gain of less
than +4dB.
NOTE: The Effect Loop is inserted between built-in Tube
Amp and built-in Effect (Leslie, Reverb, etc.)
NOTE: Depending on the connected equipment, a setting
may be required for the RETURN jack. (P. 75)
Stereo
Headphone