Hitachi WJ200 Series Quick Reference Manual page 18

CALL NOW 800-985-6929
Func. code display
Func. code display
Func. code display
Group "b"
NOTE: Pressing the [ESC] key will make the display go to the top of next function group,
regardless the display contents. (e.g. A021
CALL NOW 800-985-6929
http://www.automatedpt.com
Group "d"
SET
d001
d002
d104
ESC
Group "F"
SET
F001
F002
F004
ESC
Group "A"
SET
A001
A002
A165
ESC
b001
Press the both up and down key at the same
time in func. code or data display, then
single-digit edit mode will be enabled.
Refer to 2-34 for further information.
http://www.automatedpt.com
Func. code display
: Moves to data display
SET
0.00
ESC
Func. code display
ESC : Jumps to the next group
Save
50.00
SET ESC
50.01
SET ESC
Data display (F001 to F003)
Data does not blink because of real time synchronizing
SET : Saves the data in EEPROM
and returns to func. code
ESC
: Returns to func. code display without saving data.
00
SET ESC
01
SET ESC
Data display
When data is changed, the display
starts blinking, which means that
new data has not been activated yet.
: Saves the data in EEPROM and
SET
returns to func. code display.
: Cancels the data change and
ESC
returns to func. code display.
[ESC] b001)
16
Email: charles@automatedpt.com
display.
Email: charles@automatedpt.com