Set Address For Data Forwarding; Pop3 Communication Timeout Setting; I-Fax Output Tray Setting; Anti Junk Mail/Domain Name Setting - Sharp DIGITAL LASER COPIER/PRINTER Operation Manual

KEY OPERATOR PROGRAMS

Set address for data forwarding

When a problem prevents the machine from
printing a received Internet-Fax, the transfer
function can be used to forward the received
Internet-Fax to another machine. Use this setting
to program the e-mail address of the destination
machine. Only one e-mail address can be
programmed (maximum of 64 digits).
Touch the [FORWARDING TO] key and input the
address.

POP3 communication timeout setting

This setting determines the time the machine waits
before canceling data reception when the mail
(POP3) server does not respond. The time can be
set from 30 to 300 seconds in 30 second
increments. The default setting is 60 seconds.
KEY OPERATOR PROGRAMS
POP3 COMMUNICATION TIMEOUT SETTING
SET THE TIME FOR STOPPING DATA RECEIVE OPERATION IN THE CASE OF NO RESPONSE
FROM MAIL SERVER. (30 - 300 sec.)
6
Set the time by touching the
then touch the [OK] key.

I-Fax output tray setting

This setting is used to select the output tray for
received Internet-Faxes. The trays that can be
selected will vary depending on what peripheral
devices have been installed.

Anti junk mail/domain name setting

1
KEY OPERATOR PROGRAMS
ANTI JUNK MAIL/DOMAIN NAME SETTING
2
and keys and
3
1
2
59
This program is used to enter addresses from
which you wish to block I-Fax reception. Up to 50
addresses can be entered.
This program is normally disabled.
To block reception from the entered addresses,
touch the [REJECT RECEPTION] key.
To allow reception from the entered addresses,
touch the [ALLOW RECEPTION] key.
To ignore entered addresses and allow reception
from any addresses, touch the [ALL INVALID] key.
Entering anti junk mail/domain name
Touch the [ENTER] key.
The address entry screen appears.
ANTI JUNK MAIL SETTING
ENTER
ALLOW RECEPTION
DELETE
REJECT RECEPTION
Enter the the e-mail address or domain
name.
Up to 64 digits can be entered.
If the first letter is not "@", the string is regarded as
an e-mail address. If the first letter is "@", the
string is regarded as
(abc@sharp.co.jp is
@sharp.co.jp is a domain name.)
Touch the [OK] key.
Deleting an anti junk mail/domain name
Touch the [DELETE] key.
The deletion screen will appear.
Touch the address key that you wish to
delete.
A message will appear. Touch the [YES] key to
delete the number.
To cancel the deletion, touch the [NO] key.
ALL INVALID
a domain name.
an e-mail address.