Storing, Deleting, And Using Original Sizes - Sharp DIGITAL LASER COPIER/PRINTER Operation Manual

SCANNING SETTINGS (ORIGINAL SIZE, EXPOSURE, RESOLUTION, AND FILE FORMAT)
4
Touch the [OK] key.
OK
8 1 13
X
2
AB
1
8 14
X
2
INCH
11 17
X
5
Touch the [OK] key.
SEND SIZE
OK
00%
AUTO
2-SIDED
TABLET

STORING, DELETING, AND USING ORIGINAL SIZES

Up to 9 special original sizes can be stored. Stored sizes can be easily called up and are not erased if the power is
turned off. Storing a frequently used original size saves you the trouble of manually setting the size each time you
fax that size of document.
To cancel an original size storing, using, or deleting operation, press the [CA] key or touch the [ORIGINAL] key
on the screen.
Storing or deleting an original size
1
Touch the [ORIGINAL] key.
300 x 300dpi
RESOLUTION
PDF MMR(G4)
FILE FORMAT
AUTO 8½ 11
X
ORIGINAL
2
Touch the key under [SCAN SIZE].
SCAN SIZE
100%
8 x 11
AUTO 1 / 2
2-SIDED
2-S
BOOKLET
TAB
3
Touch the [CUSTOM SIZE] key.
5 8 R
X
2 2
MANUAL
1
8 11
X
2
8 1 11R
X
CUSTOM
2
SIZE
STANDARD SI
The specified original
size is displayed as the
scan size.
You will return to the
initial screen.
21
6
The selected size appears in the top half of
the [ORIGINAL] key.
300 x 300dpi
RESOLUTION
PDF MMR(G4)
FILE FORMAT
8½ 11
X
ORIGINAL
NOTE
You can return to automatic detection by pressing
the [CA] key.
4
Touch the [STORE/DELETE] key.
RECALL STORE/DELETE
5
Touch the original size key (
you wish to store or delete.
1 / 1 /
X5 Y10
2 8
RECALL STORE/DELETE
stored size, touch the key that shows the size that you
wish to delete or change.
If you are storing an original size, go to step 6.
If you are deleting an original size, go to step 8.
If you are changing an original size, go to step 8
and touch the [AMEND] key.
) that
To store an original size,
touch a key that does not
show a size ( ).
Keys that already have an
original size stored will show
the stored size ( )
1 / 1 /
X5 Y10
2 8
To delete or change a