Transmitting The Front And Back Sides Of Acard On One Sheet Of Paper (Card Shot) - Sharp DIGITAL LASER COPIER/PRINTER Operation Manual

SPECIAL FUNCTIONS
3
Touch the [OK] key.
RESEND
SPEAKER
OK
DUAL PAGE
SCAN
TRANSMITTING THE FRONT AND BACK SIDES OF A CARD
ON ONE SHEET OF PAPER (CARD SHOT)
When scanning a card, this function allows you to combine the front and back sides on a single sheet of paper. To
use this function, the original must be scanned on the document glass.
Your machine
CARD SHOT
Front of card
Back of card
NOTE
Only 8-1/2" (A4) width can be used for the transmitted paper size. A ratio cannot be specified and the image cannot
be rotated when using this function.
USING CARD SHOT
1
In scanner mode, touch the [SPECIAL
MODES] key.
ADDRESS REVIEW
SPECIAL MODES
FILE
ENTRY
TTINGS QUICK FILE
2
Touch the [CARD SHOT] key.
DUAL PAGE
ERASE
SCAN
CARD SHOT
2in1
You will return to the
screen of step 1.
Transmission using the "card
shot" special function
Transmission to
other machine
If the address book screen
appears, touch the
[CONDITION SETTINGS]
key to display the
condition settings screen
(page 11).
The card shot screen
appears.
4
Send the image as explained in "BASIC
TRANSMISSION METHOD"
15).
NOTE
To cancel 2in1...
Press the [CA] key.
The other machine
The front and back of the card
are scanned on one page.
3
Enter the X dimension (width) and Y
dimension (length) of the original with the
keys.
CANCEL
SIZE RESET
FIT TO
SEND SIZE
X (width) is initially selected. Enter X and then
touch the Y (
To return the X and Y values to the initial
settings configured in the key operator
programs, touch the [SIZE RESET] key. (key
operator's guide "CARD SHOT SETTINGS"
on page 14)
29
(pages 12 to
OK
OK
) key to enter Y.