Break-Out Connector Cable
The PTZ-35 MS / PTZ-50 MS also include a break-out cable (as shown in Figure 5) that connects
to the integrated interface cable with single terminal connectors. The break-out cable has the MIL-
C-26482 Series 1 Connector (Female) on one end and five pig-tail leads of the following:
Input voltage range: 24 VDC ±10 % with 24 VDC optimum value
Figure 17: Fisher 103-A032 (Female) on Break-Out Connector
Two leads are for the IR and DLTV video as shown here:
Figure 18: IR Video Output
Finally, two leads for communication as shown here:
Figure 20: RS-232 DB-9 (Female)
RS-232 DB9 Socket
COM 1 Tx
COM 1 Rx
COM 1 GND
427-0016-00-10 Revision 120
Pin 2
Pin 3
Pin5
Figure 19: DLTV video output
Figure 21: RS-422 DB-9 (Male)
RS-422 DB9 Pin
COM 3 Tx (+)
COM 3 Tx (-)
COM 3 Rx (+)
COM3 Rx (-)
Note: With RS-422 communications,
the transmit (Tx) connections from
the camera go to the receive (Rx)
connections at the other end, and
vice versa.
Copyright © 2008 FLIR Systems, Inc.
Pin 8
Pin 9
Pin 6
Pin 7
22