Pan/Tilt Panel; Figure 9: Ptz-35 Ms / Ptz-50 Ms Pan/Tilt Panel; Flir Systems, Inc - FLIR PTZ-35 MS Installation And Operation Manual

Pan/Tilt Panel

and elevation mechanism along with preset locations for the PTZ-35 MS / PTZ-50 MS.
Pan/Tilt Drive: provides pan/tilt direction and positioning
1. Presets. The preset buttons allow the user to set/get 3 preset locations and determine the
home location. These presets are valid or stored in memory for as long as the User Interface
software application is running. The Import/Export buttons allow the user to store and load
preset locations.
2. Direction. The direction allows the user to drive the pan/tilt up, down, right, left, up-right, up-
left, down-right, down-left and home.
3. Pan Speed. The pan speed increments the speed for the azimuth from slowest (left side) to
the fastest (right side) using the slider arrow.
4. Tilt Speed. The tilt speed increments the speed for the elevation from slowest (left side) to
the fastest (right side) using the slider arrow.
Manual Control: provides discrete pan/tilt azimuth and elevation input
1. Azimuth. The azimuth can be set as an absolute position between 0 and 550
2. Elevation. The elevation can be set as an absolute position between 0 and 190
Also, an elevation display dial and azimuth display dial are used to indicate current positions.

Figure 9: PTZ-35 MS / PTZ-50 MS Pan/Tilt panel

427-0016-00-10 Revision 120
The Pan/Tilt panel, shown in Figure 9, provides the ability to control the azimuth
Copyright © 2008 FLIR Systems, Inc. 13