Figure 12: PTZ-35 MS / PTZ-50 MS DLTV panel
Manual Control Panel
manually send command words to control the pan/tilt, the infrared camera and the daylight camera.
Also, view the system response command word.
Write: provides the user to send hex commands the device for control.
1. Send. Enter the appropriate hex command and this will send the command to the device.
2. Reset. This will reset the entry to all zeros.
A list of commands is in Section 9.0 Software Control Functions. For a complete list of the
commands refer to the PTZ-35 MS / PTZ-50 MS Software Interface Control Document or ICD 102-
1270-151.
427-0016-00-10 Revision 120
The Manual Control panel, shown in Figure 13, allows the user to
Copyright © 2008 FLIR Systems, Inc.
17