Table of Contents
Advertisement
MENU INTERFACE
FIRST TIME INSTALLATION
When the DTR is switched on from stand-by mode and if there is no channel stored in the database,
the First Time Installation Menu window is displayed on the screen. In this window, set the TV type
with the " / " keys and press OK to continue.
Automatic channel scan window appears and the unit commences to search for channels.
MAIN MENU
Navigating the on screen display (OSD)
Most of the OSD functions are controlled by the following keys on the remote control:
Up/Down arrow keys
Left/Right arrow keys
OK key
Exit key
Colour keys
i-key
Numerical keys
Enter letters for channel and recordings´ names as follows:
1 - abc
2 - def
3 - ghi
4 - j kl
5 - mno
6 - pqr
7 - stu
8 - vwx
9 - yz
0 - + - * / !
Main menu is accessed by pressing the MENU key on the remote control.
Navigate using the " / " keys and press OK to enter sub-menus. Press
the BACK/EXIT button to return to the previous menu.
Move one item up or down
Move one item left or right
Change the setting of a configurable item
Confirm the current action
Close the menu screen
These buttons are used for different functions depending on what
OSD is shown on the screen. Please see the I-Bar at the bottom of
each OSD for details.
Show help guide for OSD (where available)
Switch to a specific channel
Enter number values for timers
11
Advertisement
Table of Contents
