Running The Osd Menu - Grundig GDV-B2208A Owner's Manual

- When supplying the DVR with power, the DVR starts booting automatically.
- In order to cut off the power, press the power switch on the DVR front for 5 seconds. When a pop-up window
appears, select "YES" to shut down the DVR.
- For supplying the DVR with power again, push the Power button.

4.3. Running the OSD menu

The OSD can be controlled with the keypad on the front panel of the DVR, with a remote control or with an USB
mouse. In this manual we will refer to the keys of the front panel, as the procedure with a remote control and a
mouse is almost identical.
4.3.1. OSD Menu Configuration
Press [MENU] on the keypad on the front to open the configuration menu as shown below:
(1) Main Menu : The selected tab is shown in bright colour and the related sub-menu will be shown on the left,
below the tab. To move to the previous/next tab, use the [◀/▶] arrow buttons. To move to a sub-menu, press the
[Enter] key.
(2) Submenu : The selected sub-menu is shown as a tab title and the related setting will be shown. To move to the
previous/next tab, use the [◀/▶,▲/▼] arrow buttons. To move to the related setting, press [Enter]. To move to an
upper main menu, press the [ESC] button.
(3) Setting page : The selected tab is shown in blue. To move to the previous/next tab, use the [◀/▶] or [▲/▼]
arrow button and press the [Enter] key for value setting. When setting the value is a word, a dialogue box to edit
the word will open. When setting the value is a number, it should be set with using [◀/▶] or [▲/▼]. Press the
[ESC] button when the value is set. With the [ESC] button it is also possible to move to the upper sub-menu.
English 12