Table of Contents
Advertisement
The DTR will then display a list of the events found that match your search criteria. This may take
several minute to find all of the entries, especially if several days have selected to be searched. Select
a programme from the list and press the record key on your remote control, to set a recording for that
programme.
MESSAGES
When there is no signal being received (e.g. the aerial cable is
disconnected), "NO SIGNAL" message will be shown on the TV screen.
If no channels are found during a channel scan the "NO
CHANNELS HAVE BEEN ADDED YET. PLEASE GO TO
THE
INSTALLATIN
MENU
TO
ADD
CHANNELS"
message will be shown on the screen. If this is shown
please check that an aerial is connected and there are
Freeview transmissions in the area, then press ok and
scan for channels.
SPECIFIC FUNCTIONS OF REMOTE CONTROL
When there is no menu displayed on the screen, each of the keys on the remote have the following
functions.
OK KEY: when OK key is pressed Channel list appears on the screen.
RECORD KEY
The current programme is recorded to the end (based on information from the EPG). To record the
following programme as well press the RECORD key
again.
21
Advertisement
Table of Contents
