Confirming The Ft Server Control Software Version - NEC N8800-155F User Manual

5-16 Procedures after Completion of Installation

CONFIRMING the ft Server Control Software Version

The following describes how to check the version of ft Server Control Software, which consists of
various types of software for fault tolerance. Perform the procedure when you need to check the ft
Server Control Software version of the current system before adding units or attachment to NEC
Express5800/ft series.
Confirm the version following the steps below:
1. Log on the system as an authorized Administrator.
2. Open Control Panel from the Start menu.
3. Open "Programs and Features."
If the "Programs and Features" icon is not displayed, open "Programs" and click "Programs
and Features."
4. Select "ftServer Control Software" from the list of programs to check the Product version.