NEC N8800-155F User Manual page 106

4-52 Windows Setup
IMPORTANT:
A popup window prompting to reboot appears when inserting or initializing
the disk; however, you do not need to reboot the system. Select [Restart
Later] to exit the popup window.
Right-click on the Slot 0 of
4.
the PCI module 11 from the
left pane of RDR Utility,
and then click [Add
Physical Disk To RDR
Virtual Disk].
Click [OK].
5.
Verify that disk synchronization has been started and the status of the DISK ACCESS LED
6.
and RDR Utility display changes as the following table.
■ During synchronization
Synchronization
source disk
Synchronization
destination disk
RDR Virtual Disk
DISK ACCESS LED
Amber and blinking
Amber and blinking
－
RDR Utility
Condition
Simplex
Syncing
Simplex Resync x %
(x=0, 4, 8,..., 96)
Status
-
-