Checking Kernel Version; Checking Ft Server Control Software Version - NEC Express5800 Series Installation Manual

Chapter 1 Installing Operating System
2.10

Checking Kernel Version

The following describes how to check the version of kernel, which is the core of the software achieving fault
tolerance. Perform the procedure when you need to check the kernel version of the current system before
adding devices to the server.
Run the following command to confirm the version of kernel.
# uname -a
The current version of kernel is displayed.
2.11

Checking ft Server Control Software Version

The following describes how to check the version of ft Server Control Software, which consists of various types
of software for fault tolerance. Perform the procedure when you need to check the ft Server Control Software
version of the current system before adding devices to the server or updating ft Server Control Software.
Run the following command to confirm the version of ft Server Control Software.
# rpm -q lsb-ft-eula_display
The current version of ft Server Control Software is displayed.
Express5800/R320c-E4, R320c-M4 Installation Guide (Linux)
2. Setting up Red Hat Enterprise Linux 6 Server
67