NEC N8800-155F User Manual page 33

About Windows Server 2008 R2
Use the Express Setup program to install Windows Server 2008 R2. Note the following at
installation:
IMPORTANT:
Complete all the setups such as the memory expansion and the BIOS setting before
installing Windows Server 2008 R2.
NEC software package, which is to be purchased separately, is also provided with the
documentation for installation. However, see this User's Guide for installation into this
server.
After completing the Express Setup program, make settings for failure management (e.g.,
memory dump (debug information) setting) according to Chapter 4.
Both Express Setup and "Manual Setup" are applicable to Windows Server 2008 R2.
"Manual Setup" allows you to manually and individually install Windows Server 2008
R2, disk drivers and other utilities.
About Auto Installation of Utilities
The Express Setup installs the following utilities automatically.
Drivers and services for achieving duplicated operation
NEC ESMPRO Agent
The Express Setup program is exclusively used for the NEC Express5800/ft series. To execute the
setup program, simply select the item [Express Setup] from the menu displayed when starting the
system through the provided "NEC EXPRESSBUILDER." The setup program automatically
performs the complete setups from hardware internal parameter/status settings to installation of the
operating system (Windows Server 2008R2) and various utilities.
Use the NEC Express5800/ft series setup program for the first installation and reinstallation of the
operating system. This program accomplishes complicate setups.
About Operating System 2-3