Size Of The Partition To Be Created - NEC N8800-155F User Manual

Size of the Partition to be Created

The system partition size can be calculated from the following formula.
Required partition size = size required to install OS + paging file size + dump file size + application
Size required to install OS = 8,000MB
Paging file size (recommended) = Installed memory size *1.5
Dump file size = Installed memory size + 300MB
Application size = Required size
IMPORTANT:
The above-mentioned partition size is the minimum partition size required for system
installation. Ensure sufficient partition size for system operation.
Following numbers are the recommended size.
− Full Installation: 32,768MB (32GB) or more
*1GB = 1,024MB
The above-mentioned paging file size is recommended for collecting debug
information (memory dump). The paging file with initial size large enough to store the
dump file in the Windows Partition is required.
Correct debug information might not be able to be collected due to virtual memory
shortage when the paging file is insufficient, so set an enough size of the paging file
with the entire system.
Regardless of the size of the mounted memory, or the Write debugging information
(type of memory dump), the maximum size of the dump file is 'The size of the
mounted memory + 300MB'.
If you install any application program or the like, add necessary space to the partition
to install these programs.
size
Windows Setup 4-5