NEC N8800-155F User Manual page 126

5-4 Procedures after Completion of Installation
Operation Environment
NEC ESMPRO Agent can be operated in the hardware and software environments shown below.
Hardware
•
Installation system
•
Memory
•
Empty capacity of hard disk
Software Windows Server 2008 R2
Windows Server 2008
Windows Server 2003 R2 Enterprise Edition
Preparation before Setup
Be sure to read the following description before system installation or setup.
To operate NEC ESMPRO Agent, you need to make settings of TCP/IP and the SNMP of
components associated with TCP/IP.
TCP/IP Setting
See the Help started from the Start menu for how to set TCP/IP.
SNMP Service Setting
To install the SNMP Service:
For Windows Server 2008/Windows Server 2008 R2
1.
Go to [Start] - [Control Panel] and select [Programs and Features].
2. Click [Turn Windows features on or off]. "Server Manager" window appears.
3.
Click [Features].
4.
Click [Add Features]. "Add Features Wizard" appears.
5.
Check the [SNMP Services] check box.
6.
Click [Next].
NEC Express5800/ft series
Memory capacity required to operate OS + 30.0 MB or
larger
50.0 MB or larger