NEC N8800-155F User Manual page 49

4.
Remove the AC lock bracket.
5.
Remove two CPU/IO modules from the 4U chassis.
6.
Remove the DVD drive unit from the 4U chassis.
7.
When the system is installed to TOWER CONVERSION KIT, HANDLE equipped in front of
the system must have been removed. If you do not remove, you cannot close front bezel.
8.
Insert and securely tuck the 4U chassis from the front side of the tower conversion kit.
9.
Fix each 2 places, top and bottom on the front side (total: 4) with 4 pan-head screws attached
to the device.
Installing Server 3-15