NEC N8800-155F User Manual page 40

3-6 Installing Server
1. If the rack has front and rear doors, read the instruction that comes with the rack, and open
them.
2. Install the brackets from the rear side of the rack. Install the brackets with its flat side facing
inside. Place them with the round screws with washers that come with the device
symmetrically (total: 4). Fasten the screws tentatively not tightly.
(top of device)
Panhead screws
with washers
4U
3U
2U
1U
Bottom of
device
Bracket (flat sides are facing inside)
Plate
Panhead screws
with washers