Installing Windows - NEC N8800-155F User Manual

Installing Windows

IMPORTANT:
If you install Hyper-V, install Hyper-V after installing ft Server Control Software.
Follow steps below appropriate to your environment.
Turn on your system.
1.
IMPORTANT:
To install Windows Server 2008 R2, you may need to update BIOS.
To check if your system needs a BIOS update, go to:
http://www.nec.com/express
Insert the Windows Server 2008 R2 DVD-ROM into your DVD-ROM drive.
2.
Restart the system.
3.
To restart the system, press Ctrl + Alt + Del or turn off the system once, and then turn it on
again.
IMPORTANT:
When prompted to [press any key to boot from CD or DVD], press Enter while the
message is displayed.
If the Windows installation screen (shown in steps 4) does not appear, turn off the system,
and then turn it on again.
The DVD-ROM starts. A message "Windows is loading files ..." appears.
Select a language and other options from the drop-down lists, and then click [Next].
4.
Windows Setup 4-29