Confirmation Of The Ft Server Control Software Version - NEC Express5800/320Fd-LR User Manual

Procedures after Completion of Installation 5-15

Confirmation of the ft Server Control Software Version

The following describes how to check the version of ft Server Control Software. Perform the
procedure when you need to check the ft Server Control Software version of the current system such
as before adding units or attachment to NEC Express5800/ft series.
Confirm the version following the steps below:
1. Execute the command below.
# rpm -q lsb-ft-eula_display
The version of the ft Server Control Software in operation is displayed.
This completes the version confirmation.