Hold (Standby); Hold Mode – M037; Drain Mode - Sunrise spas Spas Owner's Manual

Hold (Standby)

Hold Mode – M037*
Hold Mode is used to disable the pumps during service functions like cleaning or replacing the fi lter. Hold Mode will last for
1 hour unless the mode is exited manually.

Drain Mode

Some spas have a special feature that allows a pump to be
employed when draining the water.
When available, this feature is a component of Hold Mode.
Main Screen
Several Seconds
To next item in
Main Menu
OR
M037 is a Message Code. See Page 15.
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
40940_G
While the Temperature is
still flashing, press Light
repeatedly until HOLD
appears in the LCD.
Main Screen
Press JET Button for Pump Out/Drain, only if Drain Mode is enabled.
Main Screen
or
Several Seconds
Key
Indicates Flashing or Changing Segment
Indicates Alternating or Progressive Message - every 1/2 second
A temperature button, used for "Action"
Light or dedicated "Choose" button, depending on control panel configuration
Waiting time - varies depending on function
Some spas will allow
PUMP ING OUT (Drain Mode)
with Jet 1 button
Jet 1 will toggle pump on and off.
Indicates a Menu Item that
Depends on a Manufacturer
Configuration and
may or may not appear.
J
12-12-11