Other Internal Fittings; Return Fitting (Models With Circ Pump Only); Suctions; Bottom Drain (Most Models) - Sunrise spas Spas Owner's Manual

OTHER INTERNAL FITTINGS

Return Fitting (Models with Circ Pump only)

The return fitting is simply a wall fitting through which filtered and heated water
return to the spa. Never block this fitting with any part of your body.

Suctions

These multi-holed, anti-vortex fittings in the footwell provide the intake water for the
pump(s). A powerful suction is produced here when the jet pumps are turned on. On
systems with a circulation pump, the bypass suction fitting (smaller than regular
suction), may have little to no suction on it, since the circulation pump has a lower
flow than the jet pump and the suction is only active as the filter(s) become clogged.
All suctions in our spas are VBG compliant for your safety.

Bottom Drain (Most models)

This grated fitting, connected to the drain valve, allows for uninterrupted draining of
the spa to the lowest level possible in each model.
Perimeter LED Lighting
These round or hex shaped, multi-faceted fittings, located on the vertical spa wall and
deck of the spa, are the lenses for the LED light outputs.
Air Injectors (Models with Air Blower option)
These gently domed fittings are located in the bottom of the seats and are designed to
diffuse the air, provided by the air blower, into tiny bubbles to enhance the spa
experience.
Air Blower system with Aromatherapy Canister
The Aromatherapy system works automatically whenever the air blower is activated. A
wonderful fragrance will fill the spa area adding to the overall spa experience.
To add beads to the canister:
Locate the canister on the deck of the spa Make sure the air blower is off before
removing the cap Place beads inside the canister Replace cap Turn on air blower and
enjoy!
A random trial package is included with the original Owner's Manual. Ask your dealer
for refills of aromatherapy beads.
Leisure Manufacturing Inc. 2014 Owner's Manual
(Models with Air Blower option)
DOC: OM-A-2014-EN
13