Restricting Operation; Unlocking - Sunrise spas Spas Owner's Manual

Restricting Operation

The control can be restricted to prevent unwanted use or temperature adjustments.
Locking the panel prevents the controller from being used, but all automatic functions are still active.
Locking the Temperature allows Jets and other features to be used, but the Set Temperature and other programmed settings
cannot be adjusted.
Temperature Lock allows access to a reduced selection of menu items.
These include Set Temperature, FLIP, LOCK, UTIL, INFO and FALT LOG.
Main Screen
Locks Temp. and Settings.
To next item in
Main Menu
Panel Locked
Main Screen
Any
Button
Press
Temperature Locked
Main Screen
When the Temperature is locked, the panel will display the Set Temperature
by pressing a Temperature Button, as ususal.
LOCK will appear if an attempt to reset the temperature is made with a subsequent button press.
Adjustable settings in the menus are also locked.
Other function buttons will operate normally.

Unlocking

This Unlock sequence may be used from any screen that may be displayed on a restricted panel.
Press and HOLD the Temperature Button (or UP button, if available)
Press the Light Button twice
NOTE: If the panel has both an UP and a Down button, the ONLY button that will work in the Unlock Sequence is
the UP button.
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
40940_G
While the Temperature is
still flashing, press Light
repeatedly until LOCK
appears in the LCD.
Locks all function buttons.
Main Screen
A Few
Seconds
Main Screen
A Few
Seconds
A Few
Seconds
Key
Indicates Flashing or Changing Segment
Indicates Alternating or Progressive Message - every 1/2 second
A temperature button, used for "Action"
Light or dedicated "Choose" button, depending on control panel configuration
Waiting time - varies depending on function
Several Seconds
LOCK will remain on the display
for 3 seconds and then revert to the normal display.
Main Screen
Main Screen
OR
12-12-11