Temperature And Temp Range; Adjusting The Set Temperature; Press-And-Hold - Sunrise spas Spas Owner's Manual

Temperature and Temp Range

Adjusting the Set Temperature

When using a panel with Up and Down buttons (Temperature buttons), pressing Up or Down will cause the temperature to
fl ash. Pressing a temperature button again will adjust the set temperature in the direction indicated on the button. When
the LCD stops fl ashing, the spa will heat to the new set temperature when required.
If the panel has a single temperature button, pressing the button will cause the temperature to fl ash. Pressing the button
again will cause the temperature to change in one direction (e.g. UP). After allowing the display to stop fl ashing, pressing
the Temperature Button will cause the temperature to fl ash and the next press will change the temperature in the opposite
direction (e.g. DOWN).
The temperature can be set between 60°F and 104°F.

Press-and-Hold

If a Temperature button is pressed and held when the temperature is fl ashing, the temperature will continue to change
until the button is released. If only one temperature button is available and the limit of the Temperature Range is reached
when the button is being held, the progression will reverse direction.
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
42185_A 05-10-12