Temperature And Temp Range (Standard Menu); Adjusting The Set Temperature (Standard Menu); Press-And-Hold (Standard Menu); Dual Temperature Ranges (Standard Menu) - Sunrise spas Spas Owner's Manual

Temperature and Temp Range
Adjusting the Set Temperature
When using a panel with Up and Down buttons (Temperature buttons), pressing Up or Down will cause the temperature to
fl ash. Pressing a temperature button again will adjust the set temperature in the direction indicated on the button. When
the LCD stops fl ashing, the spa will heat to the new set temperature when required.
If the panel has a single temperature button, pressing the button will cause the temperature to fl ash. Pressing the button
again will cause the temperature to change in one direction (e.g. UP). After allowing the display to stop fl ashing, pressing
the Temperature Button will cause the temperature to fl ash and the next press will change the temperature in the opposite
direction (e.g. DOWN).
Press-and-Hold
If a Temperature button is pressed and held when the temperature is fl ashing, the temperature will continue to change
until the button is released. If only one temperature button is available and the limit of the Temperature Range is reached
when the button is being held, the progression will reverse direction.
Dual Temperature Ranges
This system incorporates two temperature range settings with independent set temperatures. The High Range designated in
the display by an "up" arrow, and the Low Range designated in the display by a "down" arrow.
These ranges can be used for various reasons, with a common use being a "ready to use" setting vs. a "vacation" setting.
The Ranges are chosen using the menu structure below. Each range maintains its own set temperature as programmed by
the user. This way, when a range is chosen, the spa will heat to the set temperature associated with that range.
High Range can be set between 80°F and 104°F.
Low Range can be set between 50°F and 99°F.
More specifi c Temp Ranges may be determined by the Manufacturer.
Freeze Protection is active in either range.
See Ready and Rest on Page 6
for additional heating control information.
Main Screen
Set Temp will Show & Flash
While
temperature
is flashing...
High-Range vs.
Low-Range Temp Choice
Toggle the Range arrows in the LCD.
To next item in Main Menu
Main Screen
Set Temp will Show & Flash
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
40940_G
Press a Temp Button repeatedly to change the temperature.
Pressing and holding a Temp Button will also change the temperature.
Main Screen
OR
Several Seconds
Press a Temp Button repeatedly to change the temperature.
Pressing and holding a Temp Button will also change the temperature.
Key
Indicates Flashing or Changing Segment
Indicates Alternating or Progressive Message - every 1/2 second
A temperature button, used for "Action"
Light or dedicated "Choose" button, depending on control panel configuration
Waiting time - varies depending on function
Main Screen
OR
Several Seconds
Main Screen
OR
Several Seconds
12-12-11