Sunrise spas Spas Owner's Manual page 114

Sensor-Related Messages
Sensors are out of sync – M015**
The temperature sensors MAY be out of sync by 3°F. Call for Service.
Sensors are out of sync -- Call for service* – M026**
The temperature sensors ARE out of sync. The fault above has been established for at least 1 hour.
Call for Service.
Sensor A Fault, Senor B Fault – Sensor A: M031**, Sensor B: M032**
A temperature sensor or sensor circuit has failed. Call for Service.
Miscellaneous Messages
Communications error
The control panel is not receiving communication from the System. Call for Service.
Test software installed
The Control System is operating with test software. Call for Service.
°F or °C is replaced by °T
The Control System is in Test Mode. Call for Service.
* Some messages can be reset from the panel. Messages that can
be reset will appear with a "right arrow" at the end of the message.
Press the message text to reset the message.
Clean the filter
**M0XX is a Message Code. Codes like this will be seen in the Fault Log
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
42256_A 01-09-14