Mp3 System Operation; Mp3/Bluetooth Ready System Operation - Sunrise spas Spas Owner's Manual

MP3 SYSTEM OPERATION

The MP3 ready system will work with any digital audio player or any audio source whose output (usually
headphone jack) can be adapted to the 3.5mm stereo cable
1. Plug the3.5mm stereo gold plated cable (provided in the dock) into your MP3 player or other portable
media.
2. Turn MP3 player on. System is auto on. When the system detects an audio signal at the input it turns
on, within 5 seconds. You may experience a crackling or snapping sound whenever the system turns
on. Adjust MP3 player to desired volume in spa.
Note: During factory testing the subwoofer and speaker volume along with crossover setting are set to
optimum settings.
3. If MP3 player or other audio source has bass/treble settings or equalizer settings or music genre EQ
settings adjust these to desired levels.
The quality of the MP3 player being used and the downloaded audio files on the MP3 player may effect the
overall sound quality of the MP3 system on the spa.

MP3/BLUETOOTH READY SYSTEM OPERATION

The MP3/Bluetooth ready system will work with any digital audio player or any audio source whose output
(usually headphone jack) can be adapted to the 3.5mm stereo cable
MP3 Operation:
1. Plug one end of the3.5mm stereo gold plated cable (provided in the Owner's manual packet) into your
MP3 player or other portable media.
1. Turn on the power switch (upper switch) in the dock. The red indicator light will be on.
2. Turn MP3 player on.
3. Note: If the "BT" switch is on, you will not be able to play music via the 3.5mm connection.
4. If MP3 player or other audio source has bass/treble settings or equalizer settings or music genre EQ
settings adjust these to desired levels.
5. Depending on the size of your MP3 player you may be able to put it inside the dock and close the door.
The quality of the MP3 player being used and the downloaded audio files on the MP3 player may effect the
overall sound quality of the MP3 system on the spa.
Bluetooth Operation:
If your audio player has Bluetooth capabilities, you may find it easier to stream audio to the
subwoofer/amp system, especially if the audio player is larger than the dock.
1. Turn on the power switch (upper switch) in the dock. The red indicator light will be on.
2. Turn your audio device on.
3. Turn the "BT" switch below the power switch to "ON". You will hear a beep tone indicating the
Bluetooth system is ready to be activated.
4. Go to "settings" on your audio player and select "Bluetooth".
5. The audio player should start searching for Bluetooth devices.
6. Once it locates this Bluetooth system, it should show "Blue Audio" and begin to connect to it.
7. If your audio player requires a code to connect to the Bluetooth subwoofer/amp, enter "0000".
8. Bluetooth should complete its' connection and show you that Blue Audio is now connected.
9. Now when you go to your audio files or other audio programs such as an Internet radio player, the
sound will be streamed to the subwoofer/amp.
10. In some cases you may need to direct the audio player to play the sound to the device or to Blue
Audio.
Leisure Manufacturing Inc. 2014 Owner's Manual 21
DOC: OM-A-2014-EN