Utilities And Information - Sunrise spas Spas Owner's Manual

Utilities and Information

INFO (System Information sub-menu)
The System Information Menu displays various settings and identifi cation of the particular system. As each item in the
menu is highlighted, the detail for that item is displayed at the bottom of the screen.
SSID (Software ID)
Displays the software ID number for the System.
MODL (System Model)
Displays the Model Number of the System.
SETP (Current Setup)
Displays the currently selected Confi guration Setup Number.
SIG (Confi guration Signature)
Displays the checksum for the system confi guration fi le.
Heater Voltage (Feature not used on CE rated systems.)
Displays the operating voltage confi gured for the heater.
Heater Wattage as Confi gured in Software (CE Systems Only.)
Displays a heater kilowatt rating as programmed into the control system software (1-3 or 3-6).
H _ (Heater Type)
Displays a heater type ID number.
SW _ (Dip Switch Settings)
Displays a number that represents the DIP switch positions of S1 on the main circuit board.
PANL (Panel Version)
Displays a number of the software in the topside control panel.
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
40940_G 12-12-11