Show And Set Time-Of-Day (Standard Menu); Flip (Invert Display) (Standard Menu) - Sunrise spas Spas Owner's Manual

Show and Set Time-of-Day
Be sure to set the Time-of-Day
Setting the time-of-day can be important for determining fi ltration times and other background features.
When in the TIME menu, SET TIME will fl ash on the display if no time-of-day is set in the memory.
24-hour time display can be set under the PREF menu. (See Page 10)
Main Screen
To next item in
Main Menu
Note:
If power is interrupted to the system, Time-of-Day is not stored. The system will still operate and all other user settings
will be stored. If fi lter cycles are required to run at a particular time of day, resetting the clock will return the fi lter times
to the actual programmed periods.
When the system starts up, it defaults to 12:00 Noon, so another way to get fi lter times back to normal is to start up the
spa at noon on any given day. SET TIME will still fl ash in the TIME Menu until the time is actually set, but since the spa
started at noon, the fi lter cycles will run as programmed.
Flip (Invert Display)
Main Screen
Toggle the inversion of the segmented characters
To next item in
Pressing Light when the display is toggled will go to Main Screen.
Main Menu
If not toggled
Note:
Some panels may have a dedicated FLIP button,
which allows the user to fl ip the display with a single button-press.
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
40940_G
While the Temperature is
still flashing, press Light
repeatedly until TIME
appears in the LCD.
Main Screen
or
Several Seconds
If Time of Day is not actually programmed due to a power cycle,
SET TIME will appear in the menu instead of just TIME.
While the Temperature is
still flashing, press Light
repeatedly until FLIP
appears in the LCD.
Main Screen
or
Several Seconds
Key
Indicates Flashing or Changing Segment
Indicates Alternating or Progressive Message - every 1/2 second
A temperature button, used for "Action"
Light or dedicated "Choose" button, depending on control panel configuration
Waiting time - varies depending on function
Main Screen
or
Several Seconds
12-12-11