Sunrise spas Spas Owner's Manual page 81

Utilities
Main Screen
To FIRST item in
Main Menu
(TEMP Range)
Only if GFCI
is enabled
Only if DEMO Mode
is enabled
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
40940_G
While the Temperature is
still flashing, press Light
repeatedly until UTIL (Utilities)
appears in the LCD.
Start display of string. There is a 2 second delay on each number.
Start display of string. There is a 2 second delay on each number.
Start display of string. There is a slight delay on each number.
120 or 240 VAC input power
sensed by a
UL system at startup.
Heater Type
DIP Switch
Settings
See Page 17
Displays GFCI Test Menu
Displays Fault Log
Key
Indicates Flashing or Changing Segment
Indicates Alternating or Progressive Message - every 1/2 second
A temperature button, used for "Action"
Light or dedicated "Choose" button, depending on control panel configuration
Waiting time - varies depending on function
3-6 or 1-3 Heater Wattage
as programmed. Displayed by a
OR
CE system at startup.
DIP Switch 1 – Test Mode Off (0) or On (1)
DIP Switch 2+3+4 = the number of HS pumps with heat
Store Settings (0) or Memory Reset (1)
N/A or Special Amperage Rule 1 or 2
When set to ON, Panel will display
alternate readings from
Senor A and Sensor B
on Main Screen
See Page 18
Back to normal operation
These strings will display once
and return to the beginning.
Press Temperature again to
display the string again.
Waiting 10 seconds will allow
the screen to return to
normal operation.
Indicates a Menu Item that
Depends on a Manufacturer
Configuration and
may or may not appear.
12-12-11