Main Menus (Standard Menu); Navigation (Standard Menu) - Sunrise spas Spas Owner's Manual

Main Menus
Navigation
Navigating the entire menu structure is done with 2 or 3 buttons on the control panel.
Power-up Screens
Each time the System powers up, a series of numbers is displayed.
After the startup sequence of numbers, the system will enter Priming Mode (See Page 3).
Main Screen
If Time of Day is not set
"SET TIME" will
appear in this menu.
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
40940_G
Some panels have separate WARM (Up) and COOL (Down) buttons, while
others have a single Temperature button. In the navigation diagrams
Temperature buttons are indicated by a single button icon.
Panels that have two Temperature buttons (Warm and Cool) can
use both of them to simplify navigation and programming where
a single Temperature icon is shown.
The LIGHT Button is also used to
choose the various menus and navigate each section.
Typical use of the Temperature button(s) allows changing the
Set Temperature while the numbers are fl ashing in the LCD.
Pressing the LIGHT button while the numbers are fl ashing will
enter the menus.
The menus can be exited with certain button presses. Simply waiting for
several seconds will return the panel operation to normal.
While the Temperature is
still flashing, press Light.
Main Screen
Waiting Several Seconds in the Main Menu
will allow the display to revert to the Main Screen
Key
Indicates Flashing or Changing Segment
Indicates Alternating or Progressive Message - every 1/2 second
A temperature button, used for "Action"
Light or dedicated "Choose" button, depending on control panel configuration
Waiting time - varies depending on function
Light Cycle if enabled
Indicates a Menu Item that
Depends on a Manufacturer
Configuration and
may or may not appear.
12-12-11