Bluetooth Ready System Operation; Accessing Filter Cartridges - Sunrise spas 670 EZ Owner's Manual

BLUETOOTH READY SYSTEM OPERATION

Bluetooth Operation:
If your audio player has Bluetooth capabilities, you will find it easy to stream audio to the subwoofer/amp system,
especially if the audio player is larger than the dock.
1. Turn your audio device on.
2. You will hear a beep tone indicating the Bluetooth system is ready to be activated.
3. Go to "settings" on your audio player and select "Bluetooth".
4. The audio player should start searching for Bluetooth devices.
5. Once it locates this Bluetooth system, it should show "Blue Audio" and begin to connect to it.
6. If your audio player requires a code to connect to the Bluetooth subwoofer/amp, enter "0000".
7. Bluetooth should complete its' connection and show you that Blue Audio is now connected.
8. Now when you go to your audio files or other audio programs such as an Internet radio player, the sound will
be streamed to the subwoofer/amp.
9. In some cases you may need to direct the audio player to play the sound to the device or to Blue Audio.

ACCESSING FILTER CARTRIDGES

Our various spa models use different filter systems depending on the spa design. Identify which filter system is in your
spa and check (√) it off for future reference.
WHITEWATER SKIM FILTER
Dual cartridges mounted vertically 50 sq. ft. each, 8" (20cm) high (part #PPG-50P4)
Sunrise Spas 2019 Owner's Manual
1) Shut off your spa at the Ground Fault Circuit
Interrupter (GFCI) or Residual Current Detector
(RCD).
2) Remove the decorative top cover.
3) Remove each cartridge by simply grasping the
handle and turning it until it threads out of the
cartridge mount.
4) Reverse the procedure to install new or cleaned
cartridges.
DOC: OM-SUNRISE-19
41