Table of Contents
Advertisement
7.3.5 Parental Lock
This menu allows you to protect the installation menu and/or channels with a PIN code. You can also enter a new PIN
code in the Parental Lock menu.
Use pq to select Parental Lock from the System Setup menu and press OK to proceed. You will be asked to enter your
PIN code. (DEFAULT PIN: 1234)
Menu Lock:
Locks the installation menu. You can set Menu Lock to On or Off.
Parental Rating:
Choose between: Off, 4 years and up to 18 years. Channels with a parental rating above the
chosen age will be protected with a PIN code (if available in your local broadcast.)
New Password:
Enter your new PIN code (4 digits) here.
Confirm Password:
Re-enter your PIN code here to confirm.
7.3.6 OSD Setting
This menu allows you to change settings for: OSD Timeout and OSD Transparency.
OSD Timeout:
Sets the duration time of on screen banners and messages remove. The range is 1~10 seconds
or Always On.
OSD Transparency:
To set the OSD transparency from Off ~ 40% with 10% steps.
Load Default OSD Setting:
Press OK to clear all OSD settings and reset to default values.
7.3.7 Auto Standby
Auto Standby is a new feature that helps you reducing power consumption. When set to 30Min/1 Hour/2 Hours or 3
Hours, the receiver will switch to standby if it doesn't receive any commands during this time. Set Auto Standby to Off to
deactivate the automatic standby function.
7.3.8 Audio Description
Audio Description is a service by the broadcaster in which the content on screen is being described for the visually
impaired. Select AD Service On and Use AD as default also On to activate the service. With AD Volume Offset the level of
the AD text can be adjusted.
NOTE:
Availability of Audio Description depends on the broadcast.
7.4 Tools
Press MENU in viewing mode to enter the Main Menu.
Select the Tools submenu with pq and press OK or u to enter.
Use pq to highlight the submenu of choice and press OK proceed.
Press EXIT to leave.
7.4.1 Information
This submenu shows receiver specific information such as hardware version and software version. Please have the
Information screen on hand when you call our hotline. The person who answers your call might ask for the information
given in this screen.
7.4.2 Load Factory Settings
This option allows you to reset the receiver to factory settings, which clear all stored channels.
WARNING:
By resetting your receiver to factory default, all your settings and stored channels will be
permanently deleted. Please use this option with care.
Use pq to select Load Factory Settings in the Tools menu and press OK. You are asked to input your PIN code.
Input the correct PIN code using the 0~9 (DEFAULT PIN: 1234). A confirmation window is displayed.
14
Advertisement
Table of Contents
