Mirage smartSTREAM - BOX2IP User Manual page 40

Extended Settings and Functions
2. Select by pressing the keys PR+ and PR- if you want to change name or longitude (posi-
tion).
3. Select the text position to be changed by pressing the keys
− Enter the numbers and letters using the numeric keys of the remote control.
− Press the red function key (SHIFT) to switch between upper case and lower case.
−
Press the green function key to delete the currently selected position.
− Press the yellow function key to confirm your changes and to return to the satellite
list.
− Press the blue function key (L/R) to cancel changes and to return to the satellite list.
To add an entry:
1. Press the green function key.
2. Enter name and longitude (entering of text as described in the section Change).
To delete an entry:
1. Select the satellite to be deleted by using the keys PR+ and PR-.
2. Press the blue function key (L/R). A window will open, stating the question if you really
want to delete the entry.
OK No
3. Select or
pressing OK.
You will be directed back to the satellite list.
 Press EXIT to leave the submenu Satellite List.
 Press EXIT to leave the menu Installation and to return to TV operation.
9.1.3 Antenna Setup
The submenu Antenna Setup states several entries depending on your selection of
Fixed Antenna
at Antenna Connection.
9.1.3.1 Fixed Antenna
 At Satellite, select the satellite to which the following settings should apply.

 At LNB Freq, select the value corresponding to the used LNB. Alternatively, press OK,
select the corresponding value from the list, and confirm by pressing OK.
40
by using the keys
or
The options are limited to such satellites that are marked in the Satel-
lite List as such satellites from which you want to receive channels.
and , and confirm your selection by
Motor Antenna
and :