Mirage smartSTREAM - BOX2IP User Manual page 16

Basic Operation
5.2.1 Update via USB
If you have Internet access, you should update your receiver via the USB interface.
1. Search for the upgrade file on the internet page www.avanit.tv (menu item Support).
2. If the version number of the update file matches with the version number of the software
of the receiver, which is displayed in the submenu Information of the menu Tools, you
do not need to do anything else. Your receiver is up to date. Otherwise continue with
step 3.
3. Save the update file to a USB data storage.
4. Unpack the file with the ending .abs.

5. Connect the data storage to your receiver.
6. In the menu Tools, select the sub-menu Upgrade by USB and press the OK key.
7. At Upgrade Mode, select the upgrade mode Allcode by using the keys
8. At Upgrade File, select the file copied in step 2.
9. Select the Start button and confirm by pressing OK.
A message saying that you will lose all personal settings will be displayed.
The upgrade will be performed after selecting
pressing OK. Then, the receiver will automatically perform new start.
5.2.2 Software Update via Satellite
smart can also upload the update file on the satellite Astra 19.2° E. You can then perform a
so-called OTA update:
6
5F
1. In the menu Tools, select the submenu OTA Upgrade.
2. Leave all settings unchanged (factory settings).

OTA = Over The Air = via Satellite
6
16
Please note that the upgrade file (*.abs) is copied directly to the root
directory of the USB data storage (no subdirectory)!
The option of software update via satellite is only possible via Astra
19.2°E. Correspondingly, all settings should be left unchanged in the
status as preset:
Line
Satellite
Transponder
Frequency
Symbol rate
Polarization
Download PID
Yes
by using the keys
Target value
(1/1) Astra 19.2°E
(61/84) 12604 H 22000
12604
22000
H
343
und .
und and