Mirage smartSTREAM - BOX2IP User Manual page 30

Basic Operation
 Press OK when
 Press OK when
 Press OK when
to the EPG window.
 Press the green function key to include channel, date, switch-on time and duration of
the marked program into a timer. The Timer Mode is set to
Channel
vice is set to
 Press the blue function key to leave the EPG window and return to the window Single
EPG.
 Press the EXIT key to leave the EPG window and return to the TV program.
5.12.6 Audio Settings
1. Press the key AUDIO.
2. Select the audio mode by using the keys
Depending on the selected channel and the current program, the following modes are
Left - Right - Stereo - Mono.
available:
3. Press the keys PR+ or PR- to select another language or Dolby AC3 (Dolby Digital) as far
as provided by the TV station.
4. After selecting the desired audio mode, leave the menu by pressing the EXIT key.
5.12.7 Teletext
Teletext is an information system displayed on your TV set. Teletext is only possible if the
selected channel supports such function. The information is organized in the main pages and
subpages.
5.12.7.1 Switching 0n Teletext
 Press the key TXT.
If subtitles are offered for the program in the selected channel, a selection window ap-
pears.
 Press the keys
 Press OK to switch on teletext. The first teletext page no. 100 is displayed.

If subtitles are offered for the program in the selected channel, immedi-
ately after pressing TXT the first teletext page no. 100 is displayed.
5.12.7.2 Navigating inside Teletext
To navigate inside teletext proceed as follows:
key
Keys 0 ... 9 of the remote control
30
is selected to go two hours forward or back.
is selected to go one day forward or back.
is selected or press EXIT to close the window Time and to return
. You may change the settings.
and to select
function
Direct input of a page number
Next main page
Previous main page
Once
and .
Teletext
by default; Timer Ser-