Tv Channel List / Radio Channel List - Mirage smartSTREAM - BOX2IP User Manual

Extended Settings and Functions

 Select Only FTA
channels.
 At Scan Channel, select if you want to perform scan only for TV channels, only for radio
channels or for TV + radio channels.
 At Network Search, select if you want to search for an individual channel (
channels of a channel network (
work Search will only be active after selecting the scan mode Preset Scan (i.e. Stand-
ard Scan).
 At Scan Mode, select the scan mode:
− Preset Scan (Standard Scan): In such mode, only the frequencies included in the
TP list are regarded.
− Auto Scan (Blind Scan): Here, all frequencies are scanned, whether they are includ-
ed in the TP list or not.
 At Tuner, select the LNB to process the signals (if only one LNB is present, then this item
will not be active).
 Start channel search by selecting Search and confirm by pressing OK.
9.1.5 Multi Satellite
Multi Satellite differs from Single Satellite by the fact that all satellites marked in the satel-
lite list are scanned for receivable channels.
9.2

TV Channel List / Radio Channel List

You can individually customize the channel lists. There are various available possibilities for
editing. For reasons of simplification, only editing of TV lists will be explained in the following.
Editing of radio channel lists will be performed corresponding to editing of TV channel lists.
1. In the menu Edit Channel, go to the
sub-menu TV Channel List.
2. Press OK to open the window TV
Channel List.
FTA = Free To Air = unencrypted channels
17
44
Also here, options are limited to the satellites that are marked in the
Satellite List as such satellites from which you want to receive chan-
nels.
to determine if scan should be made only for FTA channels or for all
17
16F
Yes
), e.g. PRO7, SAT1, KABEL1, SIXX. The item Net-
No
) or all