Operation - Mirage smartSTREAM - BOX2IP User Manual

smartSTREAM - BOX2IP
8.1.1.2 Setting up the BOX2IP Server
1. Go in the menu Installation to the menu item BOX2IP and press OK. The window
BOX2IP server setting opens.
2. Set under
Satellite 1, Satellite 2, Satellite 3 and Satellite 4 the satellites broadcasting the chan-
nels which should be available for the transfer to a mobile device.

To use the smartSTREAM function, it is absolutely necessary to make these
settings.
8.1.2 Mobile Device
1. Connect your mobile device via WLAN with the router in your home network. For this,
pay attention to the respective notes in the manual of the mobile device.
2. Install the Elgato SAT>IP App on your mobile device:
- for the operating system iOS from the Apple App Store and
- for the operating system Android from the Google Play Store.
3. Run the Elgato SAT>IP-App. Receiver and mobile device will be connected with each
other via LAN / WLAN. If the connections are ok, you will see the receiver as Sat>IP
server in the Elgato app menu Settings at the menu item Devices.
4. If you do not see it, check the LAN / WLAN connections. If there are several reachable
Sat>IP servers, they are shown respectively. Select the desired device.
5. Start channel search. You will get to the menu window satellite setup, where you will
see the satellites you selected (see section 8.1.1.2, page 38).
6. Confirm the satellites by starting the automatic detection or by pressing the button
Search on selected satellites.
7. Confirm also the next two windows.
8.2

Operation

There are two possibilities to use the smartSTREAM function.
As soon as the Sat>IP-App is started, the current TV program will be transferred to the mo-
bile device.
8.2.1 Live-TV on your TV Set
Simultaneously with the start of the Sat>IP app the receiver channel list will be reduced. It
now contains only those channels broadcasted via the same transponder as the current TV
channel.
 In between this channel list you can switch channels with the remote control of your
receiver.
8.2.2 smartSTREAM Mode (BOX2IP Mode)
 Press the key BOX2IP or go in the menu Media to the menu item BOX2IP an press OK,
to set the receiver into smartSTREAM mode. On the TV screen you see now the
"BOX2IP" OSD screen instead of the TV image.
On your mobile device you have now a complete channel list, containing all channels which
are broadcasted via the satellites you set in section 8.1.1.
38