Receiver - Mirage smartSTREAM - BOX2IP User Manual

•
2 batteries (AAA) for remote control
•
user manual
2.2

Receiver

There are two versions of the mirage receivers I and II. Please select the description fitting to
your set. Differences are noted respectively.
2.2.1 Front Panel
No. Description
1 LED (indicating "good reception")
The green LED (light emitting
diode) on the receiver front
panel does not light immediate-
ly after connecting the device to
the power supply ("power
LED"), but only after the instal-
lation of programs is completed
(either via RAPS or via program

scan), and a video signal is
routed to the TV set.
If you plug the power cord for
the first time, the LED lights up
only after installation. During
later operation the receiver's
program list already exists; it
takes just a few seconds from
inserting the power plug until
you see the green LED.
I
No. Description
Display
1 4-digit display
Indicates, that the receiver
2 LED red
is in Standby mode.
Switch between standby /
STANDBY
3
normal operation
Channel down / down-
PR-
4
navigation in menu
Channel up / up-navigation
5 PR+
in menu
Indicates that a valid video
LED green
6 signal is routed to the TV
set.
Product Description
II
7