Mirage smartSTREAM - BOX2IP User Manual page 41

Possible values LNB frequency (MHz)
5150
5750
5950
9750
10000
10050
10450
A universal LNB with 9750 - 10600 MHz is the default value.
You can set signal strength and signal quality for receiving of a certain transponder:
 At Transponder, select the transponder for
which signal strength and signal quality should
be displayed at the lower window edge by us-
ing the keys
sponder, press OK, select the desired tran-
sponder from the list und confirm by pressing
OK).
No. Meaning
1 Sequential number of selected transponder
2 Total number of receivable transponders
3 Frequency (MHz)
4 Polarization, H = horizontal, V = vertical
5 Symbol rate (MS/s)

 When using a multi-feed antenna, select the port for the respectively selected satellite at
DiSEqC 1.0 .
13 14
12F 13F
 If you want to receive signals from more than four satellites, select the port for the re-
spectively selected satellite at DiSEqC1.1
DiSEqC = Digital Satellite Equipment Control, a digital control signal technology with satellite receiving
13
systems
DiSEqC1.0 supports four satellite positions
14
DiSEqC1.1 supports 16 satellite positions
15
10600
10700
10750
11250
11300
5150 - 5750
5750 - 5150
and (or select Tran-
Orientation of your antenna is optimal with maximum signal strength.
Extended Settings and Functions
Universal (9750 - 10550)
Universal (9750 - 10600)
Universal (9750 - 10700)
Universal (9750 - 10750)
Universal (9750 - 10600)
Unicable (9750 - 10600)
Unicable (10200)
Disable
. This is set to
15
14F
by default.
41