Allocation Of If Channels And Frequencies; Installation - Mirage smartSTREAM - BOX2IP User Manual

Operation in a Unicable System

10.2 Allocation of IF channels and frequencies

Receiver IF channel
Receiver 1
Receiver 2
Receiver 3
Receiver 4
Receiver 5
Receiver 6
Receiver 7
Receiver 8
 Enter the frequencies of your receiving system into the last column of


10.3 Installation

If the receiver is connected to a unicable
system, then RAPS installation will auto-
matically cancel. The window to the right
will open.
1. Press the red function key (SHIFT) to
open the submenu Antenna Setup.
2. Select the menu item LNB Freq to set
Unicable(9750-10600)
3. Press the green function key to open
the window Antenna Setup Unicable
Setting.
4. Select the menu item IF Channel and
set the IF channels (start with channel
1; respectively allocate one of the IF
channels - in ascending order - to the
connected receivers).
52
Exemp. frequency (MHz)
1
2
3
4
5
6
7
8
the table so that all relevant information is quickly available. Rule of
thumb: highest frequency  shortest cable path.
.
Frequency (MHz)
1284
1400
1516
1632
1748
1864
1980
2096