InFocus IN5132 User Manual page 85

Item
PRESENTATION
(continued on next page)
Select this to display the PRESENTATION menu.
Use ▲/▼ buttons to select one of the following items, then press ►
or the ENTER button to use the function.
• To use Network Presentation, an exclusive application, LiveViewer
is required. It can be installed from the bundled application CD. You
can also download the latest version and relevant information from
the InFocus website (www.infocus.com/support). For more details
about Network Presentation and instructions to install the LiveViewer,
refer to the LiveViewer manual.
If you set a computer to Presenter mode while its
image is projected, the projector is occupied by the
computer and access from any other computer is
blocked.
Use this function to quit Presenter mode and allow
QUIT other computers to access the projector.
PRESENTER
Select this item to display a dialog.
MODE Press ► button to choose OK in the dialog.
Presenter mode is cancelled and a message is
displayed indicating the result.
• To choose a Presenter mode setting, use
LiveViewer.
For details, refer to the LiveViewer manual.
If you set one or more computers to the Multi PC
mode on LiveViewer and send their images to the
projector, you can select the display mode on the
projector from the two options below.
- Single PC mode: displays the image of a single
computer on full screen.
- Multi PC mode: displays up to four computer images
by dividing the screen into quarter sections.
Select this item to display a dialog.
Use the dialog to change the display mode as
MULTI PC
explained below.
MODE
• To change from Multi PC
mode to Single PC mode, select
one of computers in the dialog
using the ▲/▼/◄/► buttons
and press the ENTER or INPUT
button.
Press the ► button to choose OK, and then press
ENTER or INPUT again. The image for the selected
computer is displayed on full screen.
(continued on next page)
Description
NETWORK menu
85