InFocus IN5132 User Manual page 11

Connecting your devices (continued)
NOTE
• Before connecting the projector to a computer, consult the computer's
manual and check the signal compatibility, synchronization methods and the
display resolution output to the projector.
- Some signals may need an adapter to input to this projector.
- Some computers have multiple screen display modes which may include
some signals which are not compatible with this projector.
- Although the projector can display signals with a resolution up to UXGA
(1600x1200) or up to WUXGA (1920x1200) for the IN5135 and IN5145,
the signal will be converted to the projector's native resolution before being
displayed. The best display performance will be achieved if the resolutions of
the input signal and the projector's native resolution are identical.
• If you connect this projector to a notebook computer, you must output the
display to the projector, or output simultaneously to the computer's internal
display and the projector. Contact the computer's manual for the settings.
• Depending on the input signal, the projector's automatic adjustment function
may take time and may not operate correctly.
- Note: A composite sync signal or sync-on-green signal may confuse the
projector's automatic adjustment function (52).
- If the automatic adjustment function does not work correctly, you may not see
the dialog to set the display resolution. In this case, use an external display
device. You may be able to see the dialog and set an appropriate display
resolution.
(continued on next page)
(26)
(26, 104)
(57) (26)
Setting up
Computer
11