InFocus IN5132 User Manual page 63

Item
SOURCE NAME
(continued)
TEMPLATE
(continued on next page)
(6) The current name will be displayed on
the first line. Use the ▲/▼/◄/► buttons
and the ENTER or INPUT button to
select and enter characters. To erase 1
character at a time, press the RESET
button or press the ◄ and INPUT button
simultaneously. Also if you highlight
DELETE or ALL CLEAR on screen and
press the ENTER or INPUT button, you
can erase one character or all characters
at a time. The name can be up to 16
characters.
(7) To change an existing character, press
the ▲ button to move the cursor to the
first line, and use the ◄/► buttons to
highlight the character to be changed.
After pressing the ENTER or INPUT button,
the character is selected. Then, follow
step (6) as per above.
(8) To finish entering text, move the cursor to OK on the screen and
press the ►, ENTER or INPUT button. To revert to the previous
name without saving changes, move the cursor to CANCEL on
the screen and press the ◄, ENTER or INPUT button.
Using the ▲/▼ cursor buttons switches the mode for the template
screen.
Press the ► cursor (or the ENTER) button to display the selected
template, and press the ◄ cursor button to close the displayed
screen.
The last selected template is displayed when the MY BUTTON
allocated to the TEMPLATE function is pressed (68).
TEST PATTERN ó DOT-LINE1 ó DOT-LINE2 ó DOT-LINE3

STACK ó MAP2 ó MAP1 ó CIRCLE2 ó CIRCLE1 ó DOT-LINE4
You can turn a map upside down and scroll it horizontally when
MAP1 or MAP2 is selected. To invert or scroll the map, when MAP1
or MAP2 is displayed, press the RESET button on the remote at
least three seconds to display the guides.
Description
SCREEN menu

63