InFocus IN5132 User Manual page 52

INPUT menu
Item
COMPUTER IN
FRAME LOCK
(continued on next page)
52
The computer input signal type for COMPUTER IN1 and IN2 ports
can be chosen.
(1) Use the ▲/▼ buttons to select the COMPUTER IN port to be set.
(2) Use the ◄/► buttons to select
the computer input signal type.
AUTO ó SYNC ON G OFF
• Selecting the AUTO mode allows
you to input a sync on G signal or component video signal from the
port.
• In the AUTO mode, the picture may be distorted with certain input
signals. In this case, remove the signal connector so that no signal
is received and select the SYNC ON G OFF, and then reconnect the
signal.
Set the frame lock function on/off for each port.
(1) Use the ▲/▼ buttons to select
the input ports.
(2) Use the ◄/► buttons to turn the
frame lock function on/off.
ON ó OFF
• This item can only be performed on a signal with a vertical
frequency of 49 to 51Hz, 59 to 61 Hz.
• When ON is selected, moving pictures are displayed more
smoothly.
Description